| Type of product: | Water pump / Jet pump |
| Manufacturer / model: | Waterway Executive Euro |
| Frame: | 56 |
| Common Power reference: | 3 HP single speed |
| Power: | Volts: 230
Hz: 50 Motor KW: 2.25 Motor HP: 3.21 Wet end impellor HP: 5 Amps: 12.3-12.8 RPM: 2840 Capacitor: 36uf |
| Plumbing connections: | 2 x 2 inch Waterway unions |
| Electrical connections: | No wire with pump, you will need to use your existing wire. |
| Overall outer dimensions
and widest and tallest points: |
Length: 430mm
Height: 240mm Depth: 200mm |
| Found on hot tubs such as: | Artesian, Artesian Island Spas amongst others. (Although listed on the Artesian website as a 4.8bhp, and indeed they are correct, our 3HP single speed Waterway pump shown here has a 5HP wet end. If you combine this with the power ratings of the motor it comes out as a near on perfect match. We have carried out this experiment ourselves recently). |
| Additional notes: | This pump can be found in many different Hot Tubs in various forms. It has 2 inch outlets and will work in place of either Waterway, Vico, Sta-Rite, GE, Emerson, A.O Smith, ITTor Aqua-flo and in most cases the unions will wind straight on. This pump is used for the boost jets operation.
You may find that your pump has a smooth body as opposed to this style of pump but as long as the ratings are the same it will still work. In most cases you will find that the wet end is the same but the motor may be made by a different company. You may be finding it difficult to find an exact match for your current pump. If you need our help then just give us a call or email and we will happily advise if this pump can be adapted to work with your system. Our range of pumps we offer is designed to get over most obstacles. Unions to be purchased separately |
If you are not entirely sure if this is the correct pump for your requirements, check out our handy guide:
