Type of Product: Water pump / Jet pump
Common Power Reference: 1.5 HP 1 speed (ALTHOUGH LABELLED 1.5HP, THE PERFORMANCE CURVE MATCHES OLD SINGLE SPEED HA440 AND IS CONSIDERED A STRAIGHT REPLACEMENT)
Power: Volts: 230 Hz: 50 Wet End Impellor HP: 1.5 Amps Low / High Speed: 5.7 RPM Low / High: 2800 Capacitor: 25
Plumbing Connections: Comes with 2 x 63mm unions, 2 x 2 inches unions and 2 x 50mm unions.
Electrical Connections: Comes with plain 3 core cable attached, you can easily replace this for your existing wire on site.
Dimensions: Length: 390 mm Height: 230 mm Depth: 190 mm
Commonly Used With : This Pump is the replacement for the original HA440 Commonly Found On the Spaform Spas
1 set of unions included.
This pump is also the direct replacement for the discontinued GC150 with the blue wet end. It is not a straight swap for the GC150 as there are a few plumbing changes needed.
This pump will perform at its best with 2-inch plumbing. This pump does not always perform at its best when plumbed into 1.5-inch plumbing combined with running through a water diverter valve.