Type of product: Balboa electronic control pack with paired topside control. (ALSO KNOWN AS SPA SERVE UPGRADE KIT) Make and model: Balboa GS523DZ control box and Balboa VL802D topside control Power: Volts: 230vac Hz: 50 KW: 3 Specification: Pump 1: Single or dual speed pump + circulation pump if required. Pump 2: Single speed Pump 3: Single speed Air Blower: x 1 (optional) Heater: x 1 (3KW) Ozone: x 1 Light: x1, 12 volt Radio, TV/AV: Point available Compatible with: Any retro fit system, suitable for upgrades Connections: 2 inch socket heater union sleeves. Amp cables plug on to the PCB to operate the components. Dimensions of Box: 270mm x 500mm (inc heater) 320mm (box only) x 120mm Dimensions of Topside: 265mm x 117mm Topside buttons: TIME, MODE, WARM, COOL, BLOWER, LIGHT, JETS 1 and JETS 2 (Jets 2 button operates pump 2 and pump 3 individually, keep pressing button to cycle through). Additional notes: The M7 technology means you do not need to have sensors and flow switches going back in to the tub as everything is done in side the control box by 2 sensors. This deluxe Touch Pad or Topside control allows you to set your preferred filter times by a built in clock. Its large screen also gives you detailed information about the operation of the Hot Tub and symbols display when the individual components are running. This system also displays when it is in a filter cycle and you can read the time from it also. *FREE CABLE PACK* this includes... 1 x 4 pin cable (2 speed pump) 4 x 3 pin cable (1 speed pump, blower or ozone) 1 x 2 pin cable (Spa light) If your system has a circulation pump as well as 3 separate boost pumps you will need to buy another 1 x 3 pin cable. *SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE. Useful notes: Most Spa Serve / Trade Price Group Spa's have 3 main pumps, 1 x Circ pump for heating, 1 x Small pump for Water Fountain and 1 x Air blower. To combat the problem of 2 circ pumps we recommend one of the following 3 options... 1) Remove fountain pump and link the plumbing. 2) Power both Circ Pumps on the same relay. 3) Add an additional pneumatic button to operate fountain (this must be activated at least once a week to avoid stagnent water) *the above useful notes are designed to be understood by a qualified Spa Technician or a competant individual. We won't explain these points further as they could be mis-enterpreted to someone who does not have the necessary skills and therefore would not be safe for us to advise* SOMETIMES YOU MADE NEED LONGER CABLES TO CONNECT THE TOUCH PAD AND PUMPS THESE CAN BE FOUND IN THE RELATED ITEMS BELOW THE PART NUMBERS ARE:- CA-AM301 AND TS-EXS25
