PCB Circuit Board M3
| Type of product: |
PCB or Circuit Board |
| Make and Model: |
Balboa M3 2 pump |
| Power: |
Volts:230
Hz:50 |
| Specification: |
Circ Pump:Optional (J6)
Pump 1:Single or dual speed
Pump 2:Single (or dual speed with no blower) (J10)
Pump 3:N/A
Air Blower:Yes
Heater:Yes
Ozone:Yes
Light:12 volt or 230 volt
Sensor style:Pre M7 2-prong harness
Pressure Switch:Yes |
| Compatible with: |
M3 control box. Spaform, Leisurerite, Hydrospa, Hydropool, Canadian Spa, Catalina, Aegean and many more. This PCB works with the VL range of topside panels including the VL701S and the VL801D. Use J7 to switch from Serial Deluxe to Serial Standard.
Ideal replacment for:*Aquamonde AQU100 52456. *Spaform SF100 51900 2 pump system. 51981 HPL205 PCB, when you fit this board the buttons will work in a different order but if you also purchase our overlay sticker OL-80121 this will solve this problem. Although this system works with a Catalina some have fibre optic functions which may become unusable. *HSEXP Hydrospas M3TUV. and more |
| Dimensions: |
240mm (including tabs) x 180mm |
| Additional note: |
This generic version of the M3 PCB has been seen in many forms over the years and used with lots of different manufacturers
This PCB is used as a replacement for an existing M3 control box with a PCB failure. This must not be fitted to any other device / product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate warranty. |
IMPORTANT: Our boards are tested prior to sending and need to be fitted by a competent Hot tub engineer or electrician. Faulty installment will result in damaging the board and invalidates the warranty.
Please compare the Product code with your old Board if not sure please call us!
Please Note: All electrical spare parts MUST be fitted by a qualified electrician or Hot tub Engineer
|
