Balboa BP2100 + TP800 With Wifi ModuleType of product: Balboa electronic control pack Make and model: Balboa BP2100 Power: Volts: 230vac Hz: 50 KW: 3 Specification: Pump 1: Single or dual speed pump + circulation pump if required. Pump 2: Single or dual speed Pump 3: Single (or dual speed if no blower) Air Blower: x 1 Heater: x 1 (3kW) Ozone: x 1 Light: x1, 10v @ 1amp Max Radio, TV/AV: Point available Feature: Designed for use with WiFi receiver for iPhone operation. Supplied with: Balboa TP Series Topside panel TP800 aConnections: 2 inch socket heater union sleeves. Amp cables plug onto the PCB to operate the components. Dimensions of Box: 300mm x 500mm (inc heater) 330mm (box casing only) x 120mm deep Additional notes: Please download tech sheet by clicking hereThe M7 technology means you do not need to have sensors and flow switches going back in to the tub as everything is done inside the control box by 2 sensors.This system has been designed to be able to run from the comfort of your home or whilst you are at work or away. With the addition of the new WiFi receiver the BP2100 can be operated via Android?, iPhone?, iPod touch? or iPad?This is a generic unlicensed control box. This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.*FREE CABLE PACK* this includes... 2 x 4 pin cable (2 speed pump) 2 x 3 pin cable (1 speed pump, blower or ozone) 1 x 2 pin cable (Spa light) If your system has a circulation pump as well as 3 separate boost pumps you will need to buy another 1 x 3 pin cable.*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.