| Type of product: | Heater assembly |
| Make and Model: | Balboa |
| Power: | Volts:230 Hz:50 KW:3.0 Amps:11.5-12.0 |
| Specification | Sensor compatibility:M7 24" x 2 Material spec:Incoloy Required flow rate:21gpm Flow detection:M7 Technology by using a sensor at each end of the heater assembly |
| Compatible with: | GS500, GS500Z, GS501, GS501Z (with 3.0KW on label only), GS501SZ, GS510, GS510S, GS510Z, GS510SZ, GS511SZ, GS523DZ, GL2000 mach 3, GL2001 mach 3 and more |
| Connections / Fixings: | Usually held in with two fixing studs, one at the top and one underneath. 2" white plastic female sockets to connect to plumbing |
| Dimensions: | Heater length:15 inches Heater Diameter:2 inches Between terminals:1.25 inches Overall length complete:19.5 inches |
| Additional notes: | You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help. |
Delivered on time and working , great service
